Simon Birch Plumbing and Heating

Boiler Installations Chineham.

Gas Safe registered boiler installations in Chineham for homes and businesses. Whether you are replacing a boiler that has had its day or planning a new boiler as part of a renovation, we recommend the right type and size for the property, fit it properly and set the controls up before we leave. Simon Birch Plumbing & Heating is based in Basingstoke and works across Chineham and the towns around it.

  • Right type and size for the property
  • All major boiler makes
  • Free written quotation
Ideal combi boiler installation with rebuilt copper pipework, magnetic filter and smart control
Request a Call Call 01256 805 164
What you get

What a new boiler installation includes.

Every boiler we fit in Chineham gets the same standard of work, whichever make goes in. This is what our boiler installs include as standard.

The right boiler for the property

We look at the size of the home, the radiators, the number of bathrooms and how much hot water you use at once, then recommend a combi, system or regular boiler to match. An oversized boiler wastes gas and wears out sooner.

Pipework done properly

Old connections are replaced rather than reused, with isolation valves where they are needed, so a future service or repair does not mean draining the system.

System cleaned and protected

The system is flushed and inhibited and a magnetic filter is fitted, so sludge from old radiators does not end up in the heat exchanger of your new boiler.

Controls set up and explained

Thermostat paired, heating schedule set and flow temperature adjusted for efficiency. We show you how it all works before we pack up.

Registered and certificated

The installation is notified under Gas Safe Building Regulations, and you get the certificate and the manufacturer warranty paperwork in writing.

Left tidy

Dust sheets down while we work, and the old boiler and packaging taken away when we finish.

Ideal Logic Max heat only boiler fitted inside a kitchen cupboard with a system filter above
Heat only boiler fitted inside a kitchen cupboard, with a system filter on the pipework above.
Two anthracite designer vertical radiators fitted either side of bifold doors
Designer radiators either side of bifold doors. A new boiler is a good moment to look at the radiators too.
How it works

Your new boiler in four steps.

  1. Step 1: Phone call

    Tell us about the property, the boiler you have now and what is prompting the change. A short call usually covers most of it.

  2. Step 2: Survey and quote

    We visit, look at the existing system properly and send a written quote for the new boiler installation, with the boiler model, the work involved and the price. Free, with no obligation.

  3. Step 3: Installation

    We tell you how long your job will take at the quote stage. The date is confirmed in advance and we turn up when we said we would.

  4. Step 4: Handover

    Controls explained, certificate and warranty registered, and a number you can ring if anything is not right afterwards.

What it costs Free quotation

Every property is different, so we price the job after seeing it rather than guessing over the phone. The quote is free, with no obligation. Boiler installations sit alongside the rest of the range of boiler services we offer, from the annual service to repairs, so the same team looks after the boiler afterwards.

Request a Call
Common questions

Questions about boiler installations in Chineham.

Something else on your mind? Ask when we call you back, or ring 01256 805 164.

It depends on the property and how much hot water you use at once. A combi heats water straight from the mains and suits flats and smaller homes with one bathroom. A system boiler heats a hot water cylinder, so it suits homes with two or more bathrooms. A regular boiler, also called conventional, works with tanks in the loft and is often the simplest swap where they are already in place. We recommend the right one at the survey.

A modern condensing boiler that is sized correctly and set up with a sensible flow temperature normally uses less gas than an old one. How much you save depends on the old boiler, the property and how you use the heating, so we will not promise a figure.

We fit and service all major makes, and recommend one based on the property and the warranty rather than on what we happen to have in the van.

The manufacturer warranty is registered on the day. Most warranties need an annual service to stay valid, which is one of the boiler services we offer in Chineham, and if anything goes wrong later we handle boiler repairs too.

Alongside installations, our boiler services in Chineham include annual servicing, maintenance, repairs and help when a boiler breaks down. Keeping all your boiler services with one Gas Safe registered team keeps things simple: one number to ring, whatever the boiler needs.

Yes. As well as Chineham, we carry out boiler installations in Basingstoke, Whitchurch, Andover, Winchester, Alton and Hook. For installations we often travel a little further than we would for a small repair, so it is worth asking even if your town is not listed.

Boiler quote

Get a free boiler installation quote.

Three quick questions about your home, then your details. We call you back to talk it through and arrange the survey.

Free quotation Step 1 of 2

About your home

What boiler do you have now?

Tanks in the loft usually mean a regular boiler. A cylinder with no loft tanks usually means a system boiler.

How many bathrooms?
Is the current boiler still working?

All optional. Anything you can tell us about the heating system helps us come prepared.

Prefer to talk it through?

Call the office01256 805 164 Call the mobile07474 666 615 WhatsApp a photoNot sure what you have? Send a photo of the boiler and the pipes underneath. Emailsimon@simonbirchplumbing.co.uk

We carry out boiler installations in Chineham and across Basingstoke, Whitchurch, Andover, Winchester, Alton and Hook.

Call now Request a Call